Відео

Glad I could help!

Thanks for watching :) I hope you found the video helpful!

You can try that first. If I am wanting to get one of these defrosted in a hurry. You can do it in about 20 minutes with a hairdryer. It is just a bit more work.

Yes. Not all remotes are interchangeable. It can be an off brand remote like the ones I linked in the description of the video. But they need to say that they are compatible with Liftmaster.

If you are getting a new remote, be sure that it is compatible with your brand. They are not all interchangeable.

@@RoscoReviews it was but I changed batteries in my old one but forgot to press the little button on the back of it when trying to reprogram y

Awesome! Nice work.

@@RoscoReviews only issue I had is now my window on the door I installed the mirror on doesn’t roll down all the way after I did this install ..

No problem! Glad I could help :)

If you are trying to pull them down from the bracket. There is a little tab to push that sticks out on the back side.

Awe. Thank you 🥰

You can get them at the big hardware stores. Or from Amazon. I’m sure plumbing supply stores would have them too. I can’t remember if I bought this specific one at Lowe’s or amazon. But here is a link for one. www.amazon.com/dp/B000PS8U5E/ref=cm_sw_r_as_gl_api_gl_i_J0CHAAEZHEJHM69861GR?linkCode=ml2&tag=roscoreviews-20

Unfortunately, at that point you probably have to cut into the wall a little bit to get enough room to change it out.

I think they probably got a lot of complaints about that. They dropped the price on the Ethernet adapter quite a bit.

Yeah, the price is right for sure!

No problem. Happy to help!

No problem! Hope you were able to get it all fixed up.

If the light was installed properly, it is meant to have water behind the fixture. There is water behind it all the time the light housing doesn’t actually seal to the wall. (this is specifically for the standard pentair lights. There may be lights that work differently)

@@RoscoReviews thank you very much for your explanation Sr.

Thanks! Happy to help :)

If you are trying to program multiple remotes, then yes. It should accommodate several.

@@RoscoReviews thank you

Totally agree!

Always welcome

Happy to help. They can be pretty hard to get apart. they usually put some lock tight or something on the threads.

No problem! There is always water behind the light in the little cave that the light comes out of its made to be full of water.

This method works with most chainbelin or liftmaster models. The remotes are not interchangeable though. for instance, Genie remotes will not work with liftmaster openers.

This works great as long as the hole is not torn out too big. I wish the towel bars would just come with toggle bolts to start with. it was save people having to replace them when they tear out.

@@RoscoReviews , worked like a charm! Hopefully my 14 year old will be more careful with our towel racks from now on, lol.

yeah, any drill will work. The key is drilling in the right place. trying to drill where the key goes will cause you to break drill bits.

@@RoscoReviews thanks for the reply.

Glad I could help!

I would try running a little bleach in it. Just a little bit. Like half a cup.

@@RoscoReviews I'll give it a try. I've tried vinegar of varying amounts, dishwasher cleaner, baking soda, etc but not bleach.

​@@vivavibes I saw another UA-camr talk about how these new dishwashers seal so well around the door that it traps the smell in the dishwasher and if your dishwasher is plastic, that smell gets into the polymer and releases periodically. Also, if you're not using you dishwasher enough, it can cause smells too! It's a bummer!

The bypass turns off the WiFi function of the starlink router. If you are wanting to still use the WiFi from the starlink router, leave that setting off. If you are using a different router like I did, then you may want to bypass to eliminate the signal.

You are so welcome! Glad I could help 🤗

Haha. I take no responsibility for how this knowledge is used.

They can get pretty stuck sometimes. You can try twisting the glass at the same time. Just be careful, you don’t want to bread the glass. You could also try to spray some wd-40 between the nipple and the glass.

I’m not sure. I would try to contact starlink.

You bet! Happy to help :)

Awesome. You got this!

I am sure it depends on the counter top and what the issues are. In this case the bleaching came back pretty quickly. I did find a more permanent solution however. ua-cam.com/video/TYWUXAjI9oY/v-deo.html

Yeah, That is a pretty good bet. especially in the summertime when the humidity is much higher (at least where I am from)

I think the cheerleader is my favorite. Bunny is a close second.

I believe the pool in the video is 28,000 gallons, and at its brightest setting it is definitely bright enough. Personally i like keeping it on Red. The Red doesn't attract the bugs.

Awesome!! Glad I could help :)

Using this Ethernet adapter you can setup a second router. You can use both at the same time if you wish. The speeds with starlink very from day to day (at least for me) but I get the same speeds from both routers. So I don’t think it slows it down at all. I’m not sure about the latency. If you just want to use a different router and not use the starlink for WiFi. You can turn off the WiFi feature in the starlink setting. That is what I do to use my Linksys system instead.

@RoscoReviews TY

My pleasure! Happy to help.

In most cases, Turning the light switch off should be sufficient, but if you are unsure, it’s not a bad idea to turn off the power.

You don’t need a second router. You can plug your computer directly into the starlink Ethernet adapter.

Thanks for watching. I’m always happy to help :)

Happy to help :)

I think it’s 4’-5’ long.

Awesome! happy to help 😄